EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Product Range
- »
- Tile Adhesive
Tile Adhesive
Offering you a complete choice of products which include myk laticrete epoxy grout sp100, myk laticrete 600 series unsanded grout and fosroc conbextra gp2.
Myk Laticrete Epoxy Grout Sp100
Product Price: Rs 800 / KgGet Best Price
Minimum Order Quantity: 1 Kg
Product Brochure
Product Details:
| Packaging size | 5 Kg |
| Usage/Application | Residential, Commerical and Industrial |
| Type | Base Hardner and Filler Powder |
| Joint Width | 2 mm and above |
| Color | Matches Tile Colour |
| Packaging Type | 1 and 5 kgs |
| Country of Origin | Made in India |
Description : Designed especially for interior and covered exterior floor and wall joints of all types of ceramic tile, vitreous, semi-vitreous tile, glass mosaic tiles, metal tiles, precast terrazzo, engineered stone floors and natural stones.
Recommended for Institutional and commercial kitchens, Cafeterias, residential facilities, Rest rooms, Schools and wet areas like swimming pools, sauna, water bodies and wash rooms.
Uses :
• Stain-free
• Colour fast
• Easy to clean
• Chemical and Temperature resistant
• Non-cracking or powdering
• Complies with ANSI A 118.3, EN 13888, standards.
• Water and shock resistant.
• Food grade – Certified by CFTRI, Mysore
Packaging:
SP-100 is a factory proportioned kit with Hardener
(Part A), Resin (Part B), and colored filler powder (Part C).
Additional Information:
- Production Capacity: Any Value
- Delivery Time: Immediate
- Packaging Details: 1 and 5 kgs
Get Best QuoteRequest A Callback
Myk Laticrete 600 Series Unsanded Grout
Product Price: Rs 1,000 / KgGet Best Price
Minimum Order Quantity: 1 Kg
Product Details:
| Usage/Application | Construction |
| Packaging Size | 500 g, 1 kg & 10 kg |
| Type | Grout |
| Joint Width | 3mm |
| Packaging Type | Bags |
Features / Benefits
Weather resistant • Colour fast • Easy application and clean up. • Easy maintenance • Non-cracking & Non-shrink • Complies with ANSI A 118.6, EN 13888, standards. • Water and shock resistant
Application
Designed for interior and exterior floor and wall joints of all types of ceramic tile, vitreous, semi-vitreous tile, glass mosaic tiles, precast terrazzo, engineered stone floors and natural stones. Recommended for Institutional and commercial general floor and wall areas. Can be mixed with water or Laticrete 1776, grout admix plus and used for filling the joints of width 1mm to 3 mm
Substrates
Ceramic tile• Vitrified tile• Glass Mosaic Tiles• Granite• Marble• Agglomerates (Engineered Stones)• Precast Terrazzo tiles• Bricks
Additional Information:
- Packaging Details: 500 g, 1 kg & 10 kg bags
Get Best QuoteRequest A Callback
Myk Laticrete Epoxy Grout Sp100
Product Price: Rs 650 / KgGet Best Price
Minimum Order Quantity: 1 Kg
Product Details:
| Usage/Application | Commercial |
| Packaging Size | 1 kg & 5kg |
| Type | Base & Hardener & Filler |
SP-100 Stainfree Grout is an epoxy grout specifically LATAPOXY designed for use in applications of ceramic tile, vitrified tile and stone where staining is expected
Additional Information:
- Packaging Details: 1/5th Unit -1Kg & 1 Unit -5kg
Get Best QuoteRequest A Callback
Fosroc Conbextra Gp2
Get Latest Price
Product Brochure
Product Details:
| Form of Chemical | Powder |
| Brand | Fosroc |
| Packaging Size | 25kg |
Uses
- Conbextra GP2(T) is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.
Advantages
- Gaseous expansion system compensates for shrinkage and settlement in the plastic state
- No metallic iron content to cause staining
- Pre-packed material overcomes onsite batching variations
- Develops high early strength without the use of chlorides
- High ultimate strength ensure the durability of the hardened grout
- Free flow ensures high level of contact with load bearing area.
Description
- Conbextra GP2(T) is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm.Conbextra GP2(T) is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.
Technical Support
- An experienced technical advisory team is available to give technical service on request.
Application Instructions
Preparation
Foundation surface
- The substrate surface must be free from oil, grease or any loosely adherent material. If the concrete surface is defective or has laitence, it must be cut back to a sound base. Bolt holes and fixing pockets must be blown clean of any dirt or debris.
Pre-Soaking
- Several hours prior to placing, the concrete substrates should be saturated with fresh water.
- Immediately before grouting takes place any free water should be removed with particular care being taken to blow out all bolt holes and pockets.
Base Plate
- It is essential that this is clean and free from oil, grease or scale. Air pressure relief holes should be provided to allow venting of any isolated high spots.
Levelling Shims
- If these are to be removed after the grout has hardened, they should be treated with a thin layer of grease.
Formwork
- The formwork should be constructed to be leakproof. This can be achieved by using foam rubber strip or mastic sealant beneath the constructed formwork and between joints.
- In some cases it is practical to use a sacrificial semi-dry sand and cement formwork. The formwork should include outlets for pre-soaking.
Unrestrained Surface Area
- This must be kept to a minimum. Generally the gap width between the perimeter formwork and the plate edge should not exceed 150mm on the pouring side and 50mm on the opposite side. It is advisable, where practical, to have no gap at the flank sides.
Mixing and placing
Mixing
- For best results a mechanically powered grout mixer should be used. When quantities up to 50kg are used, a heavy duty slow speed drill (400-500 rpm) fitted with a paddle is suitable.. Larger quantities will require a heavy duty mixer.
- To enable the grouting operation to be carried out continuously, it is essential that sufficient mixing capacity and labour are available. The use of a grout holding tank with provision to gently agitate the grout may be required.
Additional Information:
- Packaging Details: 25kg Pack
Get Best QuoteRequest A Callback