Call 08046056690 65% Response Rate

Send Email

Construction Chemical

Our range of products include fosroc renderoc cs crack filler, fosroc renderoc cs crack sealer, packaging size: 1 kg and fosroc renderoc sp40 (25kg).
Fosroc Renderoc Cs Crack Filler
  • Fosroc Renderoc Cs Crack Filler
  • Fosroc Renderoc Cs Crack Filler
  • Fosroc Renderoc Cs Crack Filler
  • Fosroc Renderoc Cs Crack Filler
  • Fosroc Renderoc Cs Crack Filler

Fosroc Renderoc Cs Crack Filler

Product Price: Rs 75 / KgGet Best Price

Minimum Order Quantity: 25 Kg

Product Brochure

Product Details:
Packaging Size25 kg
Packaging TypeBag
Application IndustryConstruction
Grade StandardChemical
StrengthHigh
PaintabilityNo
Country of OriginMade in India

Single part, non shrink, cementitious, crack sealer for plaster, masonry and concrete

 Description

Renderoc CS is a crack sealing cementitious material in powder form. It is easy to apply and can be finished or smoothened off with a putty blade or a damp sponge. It sets quickly on application and can be over coated with common paints / coatings.

Uses

Renderoc CS is used for sealing cracks on plaster, masonry and concrete substrates.

Advantages

Single component - Easy to use

Versatile - Can be used for plaster, masonry or concrete, can be painted after application

Non sagging - Can be used for horizontal, vertical and overhead applications

Good adhesion - Effective bonding with substrate

Non Shrink - Shrinkage cracking eliminated

Packaging

Renderoc CS is supplied in 1kg. packs.

Coverage

30 RM for a V groove crack of 6mm x 6mm. The actual coverage may vary depending on the substrate conditions.




Additional Information:

  • Production Capacity: Any Value
  • Delivery Time: Immediate
  • Packaging Details: 25 kgs
Get Best QuoteRequest A Callback
Fosroc Renderoc CS Crack Sealer, Packaging Size: 1 kg
  • Fosroc Renderoc CS Crack Sealer, Packaging Size: 1 kg
  • Fosroc Renderoc CS Crack Sealer, Packaging Size: 1 kg
  • Fosroc Renderoc CS Crack Sealer, Packaging Size: 1 kg

Fosroc Renderoc CS Crack Sealer, Packaging Size: 1 kg

Product Price: Rs 95 / PieceGet Best Price

Minimum Order Quantity: 50 Piece

Product Details:
Packaging Size1 kg
BrandFosroc
Uses
Renderoc CS is used for sealing cracks on plaster, masonry and concrete substrates.

Advantages

Single component - Easy to use
Versatile - Can be used for plaster, masonry or concrete,can be painted after application
Non sagging - Can be used for horizontal, vertical and overhead applications Good adhesion - Eff ective bonding with substrate Non Shrink - Shrinkage cracking eliminated

Description

Renderoc CS is a crack sealing cementitious material in powder form. It is easy to apply and can be fi nished or smoothened off with a putty blade or a damp sponge. It sets quickly on application and can be over coated with common paints / coatings. 

Surface Preparation

The cracks to be sealed shall be saw cut or chiselled to form a ‘V’ groove of approximately of 6mm x 6mm. The grooves shall be cleaned to remove all the loose particles, dust, etc. The groove shall be sprinkled with clean water before applying the sealing mortar.
Get Best QuoteRequest A Callback
Fosroc Renderoc Sp40 (25kg)

Fosroc Renderoc Sp40 (25kg)

Product Price: Rs 625 / 25 kg bagGet Best Price

Minimum Order Quantity: 5 25 kg bag

Product Details:
Form of ChemicalPowder
Usage/ApplicationConstruction
Packaging Size25kg
BrandFosroc
CategoryWaterproofing Coating
TypeShrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar
Renderoc SP40

Shrinkage controlled, polymer modifi ed, fi brereinforced cementitious repair mortar, specifi callydesigned for spraying
UsesRenderoc SP40 is suitable for wet spraying and hand applicationin a wide variety of repair applications, and is particularlywell suited to vertical and overhead repairs. Typical applicationswould include, but not be limited to, the following Mass infi ll to large areas Repairs to irregular profi les Excellent for repairs to fi re-damaged concrete Fast track repair programmes, where rapidapplication at high volume is required Single layer, high build applicationsAdvantages Cost eff ective - shrinkage control enables repairs to becompleted „right fi rst time Very low rebound is an additionalcost benefi t Enhanced durability - works in tandem with extremelylow permeability to prolong eff ective working life Compatibility - aligns performance closer than ever before,to that of host concrete User friendly - specifi cally developed to provide an easyto-apply product, suitable for local conditions Defi nable performance - positive benefi ts are easilydemonstrated via a single, simple measurementDescriptionRenderoc SP40 is supplied as a single component, ready touse blend of dry powders and fi bres which requires only theaddition of clean water to produce a highly consistent, handand spray grade, repair mortar suitable for most structural andload bearing repairs.Technical supportFosroc off ers a comprehensive technical support service tospecifi ers end users and contractors. Berger Fosroc is alsoable to off er on-site technical assistance, an AutoCAD facilityand dedicted specifi cation assistance in locations all over theworld.
PropertiesThe following typical results were obtained at a water:powderratio of 0.18.Test method Typical resultDrying shrinkage to ASTM C 157-9328 days : <1000 microstrainFlexural strength : >7 N/mm2 at 28 days(BS 6319 Pt.3)Tensile strength : >2.5 N/mm2 at 28 days(BS 6319 Pt.7)Compressive strength : >20 Mpa at 1 dayhand application(BS 1881 Pt.1161) : >45 Mpa at 28 days(iterative result, basedupon spray application)Note 1: 70mm cubes, air cured @ 25°C.Design criteriaAttention to the basic design criteria given below should ensurethat the full benefi ts of this technology are achieved :(i) Recommended limits for a single Spray/Trowel/Handapplication are:Minimum applied thickness : 10 mmOverhead sections : up to 150 mm thick*Vertical sections : up to 200 mm thick*Surface area of a single repair : see ‘Note’NOTE : The restricting factor on surface area will be thepracticality of maintaining a continuous application* built in layers of 10mm(ii) In situations where a substrate/repair barrier is required,or enhanced bond strength/working time is required, or wherethe substrate is likely to be damp (e.g. seawalls, quays etc.),Nitobond EP epoxy bonding agent should be used.(iii) Water addition - between 4.25 & 4.5 litres per 25 kg bagUnder no circumstances should part bags be used or additionalwater be employed. Either of these two actions will adverselyaff ect material performance, automatically invalidating BergerFosroc s standard product guarantee.
Instructions for useRenderoc SP40 should be mixed and applied in strict accordancewith the Product Method Statement, a copy of which maybe obtained from your nearest Berger Fosroc offi ce.EstimatingSupplyRenderoc SP40 : 25 kg bagsYieldRenderoc SP40 : approx 13.5 litres(at water addition of 4.25ltr/bag) per 25kg bagLimitationsRenderoc SP40 should not be used when the ambient temperatureis below 5°C and falling.Renderoc SP40 should not be part mixed, nor part bags used.Renderoc SP40 should not be exposed to running water eitherduring application or prior to fi nal set.StorageShelf LifeRenderoc SP40 has a shelf life of 6 months if kept in a dryenvironment, in its original packing.
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Sri Guru Enterprises. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.